Thanks for the link.
I found a CTRL panel, is that what you mean or the BCR2000 patch for the DW8000? Did I miss something?
It looks to be an excellent BCR2k patch for the DW8k.
This has the great advantage of not having to have a computer in the middle.
Fortunately you can do this with the DW8000 as it has all of its parameters on separate memory locations.
Not so for the DW6000 you have to unpack multiple parameters on a single byte of memory and the BCR can't do that.
The other disadvantage is that if you change the patch you can't get the BCR to request the sysex from the synth so that the BCR stays in sync with the synth.
Even if you could the BCR can't unpack a bulk sysex dump.
EVen if you could get teh BCR to request the individual paramerer sysex you can only set the controls on the BCR when the control is outputting CC messages (and perhaps some other simple messages I can't remember) and you send the correct CC.
Syncing by CC is what Live and Reason etc do so what you see on the screen is what you see on the BCR.
So even for the simplest case, when you power on the machine, you have to twist every knob and press every button to get them in sync otherwise it will jump value in performance.
I think Pablo was asking about sending a snapshot of the synth values back to the BCR.
All the best
Royce