[sdiy] Dual polarity pulse wave clock signal

[Michael Buchstaller]

Hi James,

don´t know if the shape of the pulses is important in this
application or not.
Bit the most simple way to gat this would be a cap and resistor
in series. Cap to the squarewave, Resistor to GND. The point
where the cap and resistor are tied together would be your output.
Pulse width can be adjusted with the R/C combination.

-Michael
mfG
-Michael Buchstaller

**************************
ALLNET GmbH
Maistrasse 2
82110 Germering bei München
Germany
Tel. +49 89 894 222 - 42
Fax +49 89 894 222 - 33
E-Mail: buchi at allnet.de
http://www.allnet.de


Geschäftsführer: Wolfgang Marcus Bauer
Registergericht: Amtsgericht München HRB 95 992 
UST-ID-NR. DE 128 214 294
St.-Nr. 117/115/00164
WEEE-Reg.-NR. DE 13101093

Bankverbindung:

Sparkasse Fürstenfeldbruck
KTO: 277 45 94
BLZ: 700 530 70
Swift-Code: BYLADEM1FFB
IBAN: DE61700530700002774594