[sdiy] ASM-2 1/8" sockets

[Seb Francis]

P.S. Here are some pics ...
http://www.cliffuk.co.uk/products/25-35jacks.pdf

Seb Francis wrote:
> The most common type of 3.5mm jack used on modular synths is Cliff 
> S6/BB (CL13821/CL13841).  This is what you will find on most Eurorack 
> format stuff and the new frackrack format MOTM modules.
>
> Careful to buy the CL13821/CL13841 parts rather than CL1382/CL1384 as 
> the latter does not contact well with some cheap far eastern plugs.  
> Part numbers are for Solder tags/PCB mount.
>
> A slightly more reliable design (also very cheap, but not so good 
> looking) is Cliff JYO-35 (FC6812).
>
> Seb
>
>
> brian wrote:
>> Hi there folks.  Total newbie to this synth-diy business, so pardon 
>> my silly questions, but I need a little help.
>>
>> I'm doing an order from Mouser for my ASM-2 project, and can't decide 
>> which 1/8" jacks I need to get.  In the bill of materials, it says:
>>
>> 6.35mm Mono Unswitched Sockets
>>
>> I've decided to go with the smaller size 1/8" jacks (for space 
>> reasons) and don't want to buy 100+ of the wrong part.
>>
>> Can someone point me to a part number that would work?  I sent an 
>> email to Mouser asking this same question and have not received a 
>> response.
>>
>> Thanks.
>>
>>
>> ..
>> brian
>> eightbit at earthlink.net
>>
>>
>>
>>   
>
>
>
>