[sdiy] EDP Wasp controll via midi-cv (s-trivggers and voltages)?

[Julian]

Hello,

I have an edp wasp which i am looking to control from a doepfer mcv24, of which i believe i can assign gates in the 0-10v, or 0-5.3v range.

Am i correct in thinking that i first need to convert my gate signal to an s-trigger using an NPN transistor, as shown on http://www.doepfer.de/faq/gen_faq.htm#S-Trig in order to trigger the wasp?  

And then two things:  What sort of voltage range will i need to control pitch (i.e. will my -1 to +6v range be sufficient)? And, providing all these factors are ok, what pins on the wasps proprietary interface should i be looking at connecting to?


Thanks for reading this, its appreciated,

Julian

ps. im very much in the learning stage still, so nothing overly complex please :)



 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20030520/459346a8/attachment.htm>