<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.2920.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hello,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>I have an edp wasp which i am looking to control
from a doepfer mcv24, of which i believe i can assign gates in the 0-10v, or
0-5.3v range.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Am i correct in thinking that i first need to
convert my gate signal to an s-trigger using an NPN transistor, as shown on <A
href="http://www.doepfer.de/faq/gen_faq.htm#S-Trig">http://www.doepfer.de/faq/gen_faq.htm#S-Trig</A> in
order to trigger the wasp? </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>And then two things: What sort of voltage
range will i need to control pitch (i.e. will my -1 to +6v range be sufficient)?
And, providing all these factors are ok, what pins on the wasps proprietary
interface should i be looking at connecting to?</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Thanks for reading this, its
appreciated,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Julian</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>ps. im very much in the learning stage still, so
nothing overly complex please :)</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV> </DIV></BODY></HTML>