[sdiy] power supply question

[John L Marshall]

The "S" connection is sense for the voltage regualtors. If you don't care
about voltage regulation, don't use them. The simple solution is to connect
+S to +source.

Take care,
John
------------------------------------------------------------------
ROBERT RICH will speak at this meeting.

Pacific Northwest Synthesizer Meeting

DATE CHANGE: August 2, 2003

www.sound-photo.com
------------------------------------------------------------------

----- Original Message ----- 
From: "ryan" <destrukto at gmx.net>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, July 29, 2003 2:06 AM
Subject: [sdiy] power supply question


> hi,
>
> I've got a power one 1.5A supply. I've been reading in the archives about
> wiring them. my question is about the +S and -S sense line connections.
some
> posts I found said they can be ignored, others say they can be jumpered to
> the +15 and -15 at the supply's connectors. But I am reading a file from
the
> power one site that looks like I should connection the +S to +15 and
the -S
> to the -15 at my power distribution board's connectors.
> my distribution board will be very close to the power supply.
> Is it ok to ignore the +S and -S? if not, which option should i go with?
>
> thanks,
> ryan
>