MIDI to Korg MS-10 Adaptations Re: [sdiy] midi2CV

[John Mahoney]

Brilliant! Great "bang for the buck."
--
john

-------Original Message-------
From: "R.D. Hess" <metamaticdiy at yahoo.com>
Sent: 08/28/03 09:33 AM
To: synth-diy at dropmix.xs4all.nl
Subject: Re: MIDI to Korg MS-10  Adaptations   Re: [sdiy] midi2CV

> 
>  My recommendation for a MID/CV converter for a Korg
MS-10 is a Paia Fatman. $150 gets you a MIDI/CV that
outputs the Hz/V control voltage the Korg wants to see
(you do have to change the gate from positive to
negative, but a very simple circuit will take care of
that). You also get 2 more VCOs, two envelopes, a VCF
and a VCA, so you can do something meaningful with the
jacks on the right side of the MS-10's front panel.

 Richard Hess