[sdiy] Molex connectors

[Trevor Page]

Eduardo, 

Sounds like you are missing the appropriate crimp terminals to go with
the Molex connectors that you have. You crimp or solder your wires onto
these little metal terminals. You then push them into the connector
housing, clipping them firmly into place. The crimp terminals are
obtained separately in packs. I don't think they're ever supplied with
the connector housings themselves. 

Cheers

Trev


. .  .   .    .     .      
t at introspectiv.org
http://introspectiv.org/ 



-----Original Message-----
From: owner-synth-diy at dropmix.xs4all.nl
[mailto:owner-synth-diy at dropmix.xs4all.nl] On Behalf Of elmacaco
Sent: 11 November 2002 19:20
To: synth-diy at dropmix.xs4all.nl
Subject: [sdiy] Molex connectors


Hey Gang,

I got some 4 pin molex connectors to get my power distribution scheme in
order, but I seem to be missing something.  What do you put on the wires
to get them fixed into the connector?  It seems that this missing piece
will also make the connectors grip the pins more than they do now.

Thanks

Eduardo