[sdiy] Molex connectors

[elmacaco]

Aha!  I suspected as much.  Is this something I can score at radio shack?
I'll have to check mouser and see i there are any of these crimp things
associated with the molexes in question.

Thanks man,

Eduardo
----- Original Message -----
From: "Trevor Page" <t at introspectiv.org>
To: "'elmacaco'" <elmacaco at optonline.net>; <synth-diy at dropmix.xs4all.nl>
Sent: Sunday, November 10, 2002 2:42 PM
Subject: RE: [sdiy] Molex connectors


> Eduardo,
>
> Sounds like you are missing the appropriate crimp terminals to go with
> the Molex connectors that you have. You crimp or solder your wires onto
> these little metal terminals. You then push them into the connector
> housing, clipping them firmly into place. The crimp terminals are
> obtained separately in packs. I don't think they're ever supplied with
> the connector housings themselves.
>
> Cheers
>
> Trev
>
>
> . .  .   .    .     .
> t at introspectiv.org
> http://introspectiv.org/
>
>
>
> -----Original Message-----
> From: owner-synth-diy at dropmix.xs4all.nl
> [mailto:owner-synth-diy at dropmix.xs4all.nl] On Behalf Of elmacaco
> Sent: 11 November 2002 19:20
> To: synth-diy at dropmix.xs4all.nl
> Subject: [sdiy] Molex connectors
>
>
> Hey Gang,
>
> I got some 4 pin molex connectors to get my power distribution scheme in
> order, but I seem to be missing something.  What do you put on the wires
> to get them fixed into the connector?  It seems that this missing piece
> will also make the connectors grip the pins more than they do now.
>
> Thanks
>
> Eduardo
>
>