[sdiy] s612-ax73 cable

[John L Marshall]

It is probably best that each conductor be individually shielded. With one
common shield you are inviting crosstalk between the voices. Can you can
live with crosstalk between the voices?

John

----- Original Message -----
From: gregory zifcak <zifcak at hotmail.com>
To: <jlarryh at iquest.net>; <synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, October 23, 2001 2:38 PM
Subject: Re: [sdiy] s612-ax73 cable


> thanks larry and atom,
>
> >Pin 1 = voice 3
> >Pin 2 = voice 2
> >Pin 3 = voice 1
> >Pin 4 = common ground / shield
> >Pin 5 = not connected
> >Pin 6 = voice 6
> >Pin 7 = voice 5
> >Pin 8 = voice 4
> >Pin 9 through pin 13 not used
>
> so i should just get shielded six conductor cable, two male connectors,
and
> connect the corresponding voice pins together, ignoring 4 and 9-13, right?
> or do i need 7 conductor to hook up pin 4 as well?
>
> greg
>
>
>
> >The outer metal part of the connector is also connected to ground.  That
> >should help you locate pin 4 as they are shorted together.
> >
> >The cable does need to be shielded as it is low level audio.  All signals
> >are unbalanced.
> >Larry Hendry
> >
> >
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>