[sdiy] s612-ax73 cable

[gregory zifcak]

thanks larry and atom,

>Pin 1 = voice 3
>Pin 2 = voice 2
>Pin 3 = voice 1
>Pin 4 = common ground / shield
>Pin 5 = not connected
>Pin 6 = voice 6
>Pin 7 = voice 5
>Pin 8 = voice 4
>Pin 9 through pin 13 not used

so i should just get shielded six conductor cable, two male connectors, and 
connect the corresponding voice pins together, ignoring 4 and 9-13, right? 
or do i need 7 conductor to hook up pin 4 as well?

greg



>The outer metal part of the connector is also connected to ground.  That
>should help you locate pin 4 as they are shorted together.
>
>The cable does need to be shielded as it is low level audio.  All signals
>are unbalanced.
>Larry Hendry
>
>


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp