[sdiy] s612-ax73 cable

[Atom 'Smasher']

> It is probably best that each conductor be individually shielded. With one
> common shield you are inviting crosstalk between the voices. Can you can
> live with crosstalk between the voices?
=============================================

for a cable under 10ft (3m) long, there should be little, if any,
crosstalk.

if the cable was *long* it would be more of a concern, to use 6
independantly sheilded lines.

so.... 6 conductors, with a common sheild. each of the 6 conductors
carries a voice, and the sheild gets tied to ground.

~~~~~~~~~~~~~~~~~~~~~~~

when i had a VX-90, i made a cable that was 13-pin DIN on one end, 1/4in
tip-sleeve connector on the other end, so i could run any sound through
the VX-90 (quite fun, indeed).

now, i have a VX-600, which uses the same 13-pin connector as an output,
but has 2 1/4in audio inputs!

one of these days (maybe), i'm gonna make a box that connects to the
output, and has 6 1/4in outputs (and maybe some switches).


	...atom

----------------Void-If-Detached----------------
http://smasher.suspicious.org/fs1r  Yamaha FS1R

	"The more corrupt the state, the more numerous the laws."
		-- Tacitus (A.D. 55?-130?)