Yamaha CS80

Hello

what kind of precautions are nesscearry for the cs-80 restoration (replace
cmos parts).
I thought about to conncet the tip of the desoldering gun, tip of soldering
gun, myself by hand wrist all by esd discharge wires to ground (german
Schutzkontakt) or should I connect it to CS-80 keyboard?

Thorsten P. wrote:

> Hello
>
> what kind of precautions are nesscearry for the cs-80 restoration (replace
> cmos parts).
> I thought about to conncet the tip of the desoldering gun, tip of soldering
> gun, myself by hand wrist all by esd discharge wires to ground (german
> Schutzkontakt) or should I connect it to CS-80 keyboard?
>

I just used a wrist strap to a ground wire in the CS-80. I think most
good soldering and de-soldering stations are ESD protected. You can
check with an Ohm-meter from tip to the ground plug.

David


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date: 2/24/2006