Yamaha CS80

>
> Hey
> 
> On my CS80 the 16' trimmer of OSC 3 has come loose from it's tabs.
> That is, the tabs themselves have lifted off from the pcb. :(
> I'm not afraid to fix it myself, if I only knew how.
> Is the fix difficult enough that I should have a tech take a look at it?
> 
> To top it off, I tried to take the card out and the damn screws feel like welded on! I'm afraid of spoiling them... 
> 
> Any help would be appreciated!
> 
> - Jussi
>

>
> Looking at the pcb, I wonder if I could just solder a short lead from tab to tab following the traces? Then apply a drop of glue to hold the trimmer in place? Hmm..
> 
> --- In yamahacs80@yahoogroups.com, "Jussi" <jussi.kulomaa@> wrote:
> >
> > Hey
> > 
> > On my CS80 the 16' trimmer of OSC 3 has come loose from it's tabs.
> > That is, the tabs themselves have lifted off from the pcb. :(
> > I'm not afraid to fix it myself, if I only knew how.
> > Is the fix difficult enough that I should have a tech take a look at it?
> > 
> > To top it off, I tried to take the card out and the damn screws feel like welded on! I'm afraid of spoiling them... 
> > 
> > Any help would be appreciated!
> > 
> > - Jussi
> >
>