Yamaha CS80

Hi every one ! I am the Microsine cs-80 dude  

http://www.flickr.com/photos/31603983@N05/3463912661/in/set-72157615629600213/
 
I have found an other CS-80 durring this summer! This one is 1000x in better shape then the microsine . But The major bug is that the power supply assembly is missing . 

So i am looking for a completed cs-80 power supply assembly ! Dead or alive , ( but obviously with a working transformer ) .

regards , Ramcur .

HI AGAIN ! I have swaped the power supply from the microsine cs-80 to the new cs-80 ,,, and everything is working A1  ,  i am one lucky fellow .. 



--- In yamahacs80@yahoogroups.com, "zenithaudio2003" <zenithaudio2003@...> wrote:

>
> Hi every one ! I am the Microsine cs-80 dude  
> 
> http://www.flickr.com/photos/31603983@N05/3463912661/in/set-72157615629600213/
>  
> I have found an other CS-80 durring this summer! This one is 1000x in better shape then the microsine . But The major bug is that the power supply assembly is missing . 
> 
> So i am looking for a completed cs-80 power supply assembly ! Dead or alive , ( but obviously with a working transformer ) .
> 
> regards , Ramcur .
>

zenithaudio2003 wrote:
> HI AGAIN ! I have swaped the power supply from the microsine cs-80 to the new cs-80 ,,, and everything is working A1  ,  i am one lucky fellow .. 
> 

Great news - congratulations!  Are you still going to try and get the 
first one working or part it out for spares?

Yes for sure !  But maybe i will make it ONE section like the cs60 . the cost of the repair is starting to get ridiculous . the section 1 is already working 100% on the microsine ,on section 2  i got 3 wave shaper chips dead and 2 dead ocs chip  ....  So ( for the moment ) the best idea... is to keep the microsine as a cs-60 and keep parts of section 2 as spare parts . for both of them !!!!! Or maybe some relatively low priced boards will show up on ebay !!! HMMM . 



--- In yamahacs80@yahoogroups.com, David Rogoff <david@...> wrote:

>
> zenithaudio2003 wrote:
> > HI AGAIN ! I have swaped the power supply from the microsine cs-80 to the new cs-80 ,,, and everything is working A1  ,  i am one lucky fellow .. 
> > 
> 
> Great news - congratulations!  Are you still going to try and get the 
> first one working or part it out for spares?
>

A little bit OT, but I think this is good news good news for CS70m owners!

-------------
What?
-------------
You now have the opportunity to get a Yamaha CS70m Midi retrofit by 
Kenton Electronics UK. It will be a redesign of the Kenton kit that was 
discontinued due to parts availability quite some years ago. Scroll down 
to the end of the document to read the specifications.

-------------
How?
-------------
This is a group buy, which means that we need at least 10 prepaid orders 
to start the production. Production and distribution will be approx 8 
weeks.

-------------
Price?
-------------
349 UK pounds + VAT which needs to be paid in advance to Analog Sweden. 
If we don't reach 10 prepaid orders by the 1st of October 2009, your 
money will be promptly returned. Shipping cost not included.

-------------
Ordering?
-------------
Send a mail to info@... for further instructions.

-------------
Deadline?
-------------
October 1, 2009

-------------
installation
-------------
The kits are not intended for installation by the end user. They should 
always be fitted by an experienced synth engineer. The kits are built 
and tested before dispatch. DIY-kit NOT available. Analog Sweden can do 
the installation.

-------------
Background
-------------
We at Analog Sweden have had a few enquiries about CS70m retrofits, so 
we got in touch with Kenton to investigate the possibilites for a new 
production run. Kenton wanted to have a group order to start the 
production, and here we go. Analog Sweden is a studio and repair 
workshop in Helsingborg, Sweden. You can see what we do at 
www.analogsweden.com/blog

If in doubt, you can verify my claims if you get in touch with Kenton, 
sales@...

-------------
Contact info
-------------
Fredrik Segerfalk
phone +46 (0)709 410988 (we're in Sweden, EU)
info [at] analogsweden .com


-------------------------------------------------------
SPECIFICATIONS
-------------------------------------------------------

This retrofit kit for the Yamaha CS-70M adds the following MIDI control:

For incoming MIDI:

Any MIDI channel can be selected

Notes on MIDI note numbers normally 36 - 96 but transpose possible

Program change numbers 1 - 32
where 1 - 16 = upper + manual, 17 - 32 = lower + manual

Pitchbend -

Mod Wheel -

Filter cutoff frequency (of low pass filter)

Volume

Portamento

Sustain

This kit is to receive MIDI only, no MIDI can be sent, however a Thru
socket is included.

Hardware:
MIDI In, & Thru sockets
Push button (for programming the MIDI setup)
Setups are stored in non-volatile memory (Eeprom)

The kit comprises the following items:
Circuit board -
Small pack - contains DIN sockets and mounting hardware
Large pack - contains cable assemblies
User instructions - How to change from default settings and general
instructions
Fitting instructions - step by step fitting guide plus diagrams of where
to connect what.

All kits are fully checked and tested before despatch.

Note: Our retrofit kits are not intended for installation by the end
user. They should always be fitted by an experienced synth engineer.

Errors & Omissions excepted

-------------------------------------------------------

This text can be found on http://analogsweden.com/blog/?p=504


Best regards,

Fredrik Segerfalk
www.analogsweden.com/blog