Re: [yamahacs80] Wanted: Rear switch for selecting high or low output.
2008-11-27 by David Rogoff
Heath Finnie wrote:
over but could not find a matching slide switch. I ended up mounting a
dpdt toggle switch in its place. If I were doing this again, I'd just
hardwire the high-level outputs to the jacks and skip the switch. In
the meantime, you should be able to use the headphone output.
David
> I need this switch as the one in mine fell to pieces rendering the outputs silent.I recently worked on a CS80 that had a bad level switch. I looked all
>
over but could not find a matching slide switch. I ended up mounting a
dpdt toggle switch in its place. If I were doing this again, I'd just
hardwire the high-level outputs to the jacks and skip the switch. In
the meantime, you should be able to use the headphone output.
David