the original CS80 volume pedal was a lightbulb and photocell with a teardrop shaped dowser to limit light to the photo cell...
I have yet to try my FC7s on my 80 as I once had ground rail burn out with a faulty connector short on the expression jack.... there is voltage there to power a bulb...
---- On Mon, 22 Jan 2018 15:22:18 -0600 Fernando Zarone fernandozarone@... [yamahacs80] <yamahacs80@yahoogroups.com> wrote ----
I have yet to try my FC7s on my 80 as I once had ground rail burn out with a faulty connector short on the expression jack.... there is voltage there to power a bulb...
---- On Mon, 22 Jan 2018 15:22:18 -0600 Fernando Zarone fernandozarone@... [yamahacs80] <yamahacs80@yahoogroups.com> wrote ----
Hi all.
After one year (moved to a new house) I switched my CS-80 on and fortunately everything still works fine, but the FC-7 connected to it. The malfunction is: when I push the pedal forward it raises the volume /wha-wha regularly, but when I go back down to the “low “ position, the volume takes some seconds before fading. In other words, when used fot raising the volume it works, when lowering it, it is … delayed. Like a long release…Any clue?ThanksFernando