Yamaha CS80

A few months ago, I accidentally shorted the 8.5v rail to ground while calibrating VR723. (I know, I'm an idiot.)   Common sense told me to take out TR709, check it and replace.  I replaced TR709 with a TIP31C as well as IC722 and still have the same problem on the output: 3 volts and some change.  I Removed the lead and get about 7.8 volts with the PSU unloaded and a little bit less with a 1M ohm load.  The metal oxide resistor reads about 8/10 of an ohm in circuit.

I was wondering if anybody could post what some of the voltages are in their CS-80 PSU for me.  It would be nice if I could have the voltages from TR711, TR710, D713 and IC722