I was thinking, did you check the signal when you raise the "keyboard- control" levers to max. I can imagine this can result in clipping the chorus section. I tried to adjust the chorus/tremelo-section too some time ago, to minimize noise. I found it very difficult to find the sweet spot (I played chords since this raises the level). The clock-setting is very critical. The vca-levels are critical since clipping will result. I have to admit, I never use the chorus/tremelo since I don't like the sound of it. --- In yamahacs80@yahoogroups.com, "willgregori" <will.gregory@...> wrote: > 7) Output level of Voice cards was different for each voice. Adjusting > the levels to factory specs (VCA gain should be 80mV) resulted in a > very low general output level, so I suspect this value is wrong. I just > increased the level up to 200-300mV, just before it starts clipping the > chorus and ensemble section. Now the output is much hotter and SN ratio > of Effect section much better.
Message
Re: CS80 1271 back on duty...
2009-01-30 by erikfromhere
Attachments
- No local attachments were found for this message.