Yamaha CS80

I have her open and I Need CS80 advice for removing key switches...

Looking from the players point....
I need to remove the right "Throw"contact from my middle G...(this 
would be the lower right spring contact that needs removing........)

It has a crack in the underside which has deteriorated its 
flexibility, causing the key to sustain  after a few good key 
strikes....(pushing the contact manually back down corrects it 
momentarily, but the rigidness has gone in the spring to a point it 
could break off.....


So far,I have keybed  moved so it is resting  across the front right 
corner...
The white plastic cover is off and the bank of switches can be 
rotated vertically with the screws removed .....

Question
1..... how hard (if possible) is the desoldering of the  spring 
contacts? I have removed the solder from the back, but the spring 
seems to be solid in the PCB....Are these removable?...

2.....If removable, which direction should I pull,and are there any 
catches I need to manipulate so it slides easier?
 
3....Are there any replacements contacts amongst this group?(if not, 
I may just swap with a less used key.....) 

Thanks .....she's open and waiting.....lol