Yamaha CS80

Try the TS board , maybe there is the selecor (iG00157) on the first channel in need to be changed...
M

----- Original Message ----- 
  From: Heath Finnie 
  To: yamahacs80@yahoogroups.com 
  Sent: Wednesday, November 26, 2008 3:30 AM
  Subject: [yamahacs80] Presets staying the same when selecting?


  On my CS-80 I noticed that some of the presets are not switching properly. For instance, 
  Brass 1 and Flute are the same. I once had a similar problem with the footage (on Channel 2 
  8' and 5 1/3' were both playing an 8') and it turned out that two diodes were touching on the 
  board. Separated the diodes and the footage returned.

  I checked on the T51 and T52 boards, but saw nothing similar going on. Any other ideas 
  what might cause this behavior? Only certain ones are doing it also.

  Thanks,
  Heath



   

[Non-text portions of this message have been removed]