Yamaha CS80

Thanks for that tip. Don't know why I didn't think of that as I've done that in a P5 before. 
After swapping them and the problem stayed I decided to crank up the scope and check 
the waveshaper and I believe that is the problem. Now I just need to find one of those!

Thanks,
Heath


--- In yamahacs80@yahoogroups.com, rj krohn <r_j_d_2.phila@...> wrote:
>
> 
> 
> 
> 2. Voice 3 on Channel 2 is outputting only noise instead of a saw/square. Sine is 
working 
> 
> well.
> 
> when i had this problem, it was a bad VCO chip(153?). sine and noise are not generated 
there. easiest way to tell is to swap the chip out for a working voice-be careful! the legs 
on those types of chips are easy to bend putting them in and out of sockets. good luck-rj
>  
> 	 
> 	
> 	
> 
> 
> 
> 
> 
> 
> 
> 
> 	
> 
> 
> 	
> 	
> 
> 
>       
> 
> [Non-text portions of this message have been removed]
>