Yamaha CS80

Sweet!  I am up for it.

Let me know what we have to do.  I have been working out, so I think I can handle moving the synth again. hahaha

-Scott

________________________________
> To: yamahacs80@yahoogroups.com
> From: david@...
> Date: Tue, 16 Sep 2008 09:29:49 -0700
> Subject: Re: [yamahacs80] Auto-tuner / tuner assist idea
> 
> 
> Scott Metzger wrote:
>> David can you explain how the tuning would work without the technical stuff?
>>
>> I think installing it right next to that ugly Kenton switch would be a good place for it.
>>
> Ok - in English:
> 
> First, I was planning on mounting it on the inside of the front panel:
> no holes/drilling/etc. You have to open up the top to get to all the
> tuning knobs anyway.
> 
> Next, you would follow the tuning guide, which is basically the following:
> 1) Set Feet to 2'
> 2) Tune oscillator on highest A
> 3) Tune oscillator on lowest A
> 4) Repeat 3 for 4', 8', and 16'
> 
> The board I described lets you easily do the tuning step because of few
> things:
> 1) Has built-in tuning reference
> 2) Shows beat frequency on red/green LED. Kind of a simplified strobe-tuner.
> 3) Also allows hearing this beat frequency and/or reference tone/oscillator.
> 4) Has display to tell you which voice is sounding
> 
>