Yamaha CS80

I've finally taken a photo of what I've built.
Taking up your *great* idea of using a pedestal, and combining it with an 
integrated version of the wooden bars that allow ventilation.
http://launch.ph.groups.yahoo.com/group/yamahacs80/photos/view/b5ba?b=1&m=f&o=0

JH.

----- Original Message ----- 
From: "erikfromhere" <moogsynthex@...>
To: <yamahacs80@yahoogroups.com>
Sent: Tuesday, September 18, 2007 2:29 PM
Subject: [yamahacs80] Re: Keyboard stand for CS-80


I mentioned it before in this group, I use pedestals (as used in
office-furniture) as stands for both my CS80's. Dimensions are: 60cm
height, 80cm length, 40cm depth. They have 4 casters (not too small)
so you can easily move the CS80 around. Besides, you can use the
drawers to store your manuals, parts etc. There is enough room left
for your legs and feet since the pedestal is at the flat part of the
CS80. When sitting in front of the CS80, the drawers open at the
left or rigt side to give you an idea. I placed some wooden bars
under the synth not to obstruct ventilation.
Good luck with restoring (do you have to ?)your CS80 when it gets
in !