I have an old wooden drafting board i set on top of the keyboard frame
that I work on boards with without fear of shorting against live or
grounded rails. Each card will operate removed from its cage position.
Crow
/**/
JH. wrote:
that I work on boards with without fear of shorting against live or
grounded rails. Each card will operate removed from its cage position.
Crow
/**/
JH. wrote:
> When I want to measure on an individual board (like the PRA board) - can I
> do this outside the card cage?
>
> I know the mounting screws carry +15V and GND, but there's also cables
> running to the board for +15V and GND, so it should be possible to remove
> them, turn the CS-80's power on, and measure on the boards- right ?
>
> Please confirm, or stop me from making anything stupid ...
>
> JH.
>