you "have" to use a CS80 expression pedal...There is a light and photo cell inside the pedal....it is not a pot...If anything is shorting inside the 1/4 inch TRS jack, you will send voltage down the ground rail and end up needing service..... -----Original message----- From: rj krohn r_j_d_2.phila@... Date: Mon, 26 Nov 2007 16:30:31 -0700 To: yamahacs80@yahoogroups.com Subject: [yamahacs80] periodic distortion on cs80 output question(plus pedal question too) hi folks-im wondering if anyone has experienced this? my cs80 will randomly get a distortion on the output, and it will then randomly go away. it will never last longer than 5-7 seconds at a time, and it doesnt seem to be "control induced" in any way. (it sounds alot like a preamp does with the gain all the way up(signal still comes through). im going to be recording with it in a little while, so i kinda would like to clear this up. any leads onthis? also, i have heard a horror story(old crow site maybe?) about shorting things out by plugging in an expression pedal. i have yet to do this on my 80. any advice? plug it in before i turn it on? should i be worried, or no? thanks guys!!! --------------------------------- Get easy, one-click access to your favorites. Make Yahoo! your homepage. [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
Message
Re: [yamahacs80] periodic distortion on cs80 output question(plus pedal question too)
2007-11-27 by Laurie Curry
Attachments
- No local attachments were found for this message.
