Yamaha CS80

Allright....

you are going out on a limb there....

I advise you to keep it flat if shipping...

A.. it wont tip over and slam down the wrong way...

B.. All previous CS80 wrtings are against the "horizontal pot" thru
transferable vibration situation in a back edge situation of
travel....
-----Original message-----
From: "erikfromhere" moogsynthex@...
Date: Thu, 15 Nov 2007 00:56:48 -0700
To: yamahacs80@yahoogroups.com
Subject: [yamahacs80] Re: CS80 moving, tuning and stuff.....

I don't believe the plane of transportation has any effect. It
doesn't matter in what plane the vibration comes in. It's just
vibration itself in combination with the spring-force that's left
inside the trimmers (the older, the less strong the trimmer-shaft
makes contact).
If the casters were on another side, it would result in the same
risks. Just carry the CS80 with two persons if thefloor is uneven.

I feel the older the synth gets, the more problems these trimmers
cause (too less spring-force, dead spots). Most of the problems I
had were caused by these trimmers (vca- adjustments for instance)
Are these trimmers, or good new 1:1 replacements, still available,
does anybody know ?


--- In yamahacs80@yahoogroups.com, "Quazimodo"
wrote:

>
> Hi everyone,
>
> I currently have one of my CS80's opened up and am working on a

couple

> of faulty voices. Something occured to me, as I am looking at

the 'M'

> boards closely. It is well documented that moving the CS80 can

throw

> it out of tune because the type of preset controls used to tune the
> synth are prone to vibration effects. It occured to me that

virtually

> ALL the presets on the 'M' board are of similar or even the same

type

> and therefore prone to the same problem. That would mean that not

only

> the tuning would suffer from continued movement but all the VCA and
> VCF calibrations as well..!
>
> I wonder which would be the safest plane to move the CS80 on?
>
> I am asuming that leaving it standing on it's castors (as opposed

to

> lying it flat ie: the same plane as when it is on it's stand)

would be

> the best.
>
> Anyone with any ideas on the subject?
>
> Cheers all,
> TOM
>

[Non-text portions of this message have been removed]