Yamaha CS80 group photo

Yahoo Groups archive

Yamaha CS80

Index last updated: 2026-04-14 00:16 UTC

Message

Re: [yamahacs80] CS80 PSU mod-anyone ever done this?

2007-11-06 by JH.

I've never done this (in fact, my CS-80 isn't even in my home yet), but I'll 
offer one thought nevertheless:

The GND impedance may be a problem.

Linear VCOs are very sensitive to small offset voltages in the low frequency 
range, so a voltage drop across the GND connection may be a problem. I have 
that theory, which isn't any more than a gut feeling right now, and may be 
totally wrong, that the slight coupling via voltage drop *inside* the CS-80 
may play a role in it's increadible lush-ness - then a longer GND path might 
turn the feature into a problem.
But then again there's a servo sensing for the PSU regulation if memory 
serves - that would *allow* a rmote PSU (with sense and power wires both 
going thru the umbilical cord).

JH.

----- Original Message ----- 
From: "rj krohn" <r_j_d_2.phila@...>
To: <yamahacs80@yahoogroups.com>
Sent: Tuesday, November 06, 2007 7:31 PM
Subject: [yamahacs80] CS80 PSU mod-anyone ever done this?


hi folks, i wanted to ask why a particular mod has never been discussed, or 
done, to my knowledge on CS80's. hoping for some practical answers, to see 
if i consider should setting out on this.

it seems like it would be relatively easy to detach the PSU from the CS80, 
and make it an external unit. im assuming that most(if not all) of the 
reknowned pitch instability/temperature issues were due to the massive 
PSU/input transformer. after seeing this firsthand, i see there are just two 
harnesses and a ground wire that connect to the rest of the synth. it seems 
like it would be pretty easy to take the PSU out, install 1 or 2 connectors 
to adapt the harnesses to, and build an external box for the PSU. there cant 
be more than 16-18 total harness pins for the rails of the PSU. by now, im 
sure every cs80 in existence is a studio unit, and this wouldnt be too 
inconvenient, and could potentially help the stability. of course, the 
connector would have to be a screw-in type that could be well secured to the 
chassis.

is there a reason this hasnt been done, or has this been covered already, 
and a terrible idea for some reason? thanks guys!

 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]




Yahoo! Groups Links

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.