Yamaha CS80

Thank you!

JH.

----- Original Message ----- 
From: "erikfromhere" <moogsynthex@...>
To: <yamahacs80@yahoogroups.com>
Sent: Tuesday, September 18, 2007 5:24 PM
Subject: [yamahacs80] Re: Keyboard stand for CS-80


--- In yamahacs80@yahoogroups.com, "dark_november2000" <jhaible@...> 
wrote:
  
> (1) You only need to support the (relative small) flat part of the 
> underside?
Yes, the weight is at the back, the original steel support does the 
same, it's bolted to the flat underside of the CS80.
> 
> (2) The crews to open everything up are _not_ in th eflat part, 
but 
> all in the sloped part right?
Most are, I took the screws out so I can open the lid if I want to.
> 
> (3) What's the exact distance between the screws (from left to 
right) 
> on the underside? (to avoid something in th estand to _just_ 
> accidentially being the same width.
If I remeber well: leave the inclined part free, than you can access 
all screws
> 
> (4) Most important: What is the exact difference in height between 
the 
> flat underside (where the synth will rest on the stand), and the 
top 
> surface of the white keys?  
24 cm




 
Yahoo! Groups Links