Xpantastic!

Thx !

Yes w/ the Matrix-1000 in Channel Mode G1 ( manual page 21 top to bottom).
Each voice responds to incoming midi on a different channel then, voice 
1-6 to channel 1-6 for notes and continuous controllers PB, CC#7 and 
pressure/AT independently.
Voice 1 is on the basic channel which can be all 16 available midi 
channels. The next channels go n+1 then if the basic channel isn�t 
channel 1.

It�s perfect to use w/ a midi-guitar controller b.t.w.

With the PMM, there is no limitation to a type of  controller.

Because a PMM can remap controllers not only to midi channels, your 
pitchbend controller could be adressed/remapped to any other midi CC too 
or any other controller could do PB.

For keyboards which aren�t able to send midi data on 6 channels 
simultaneusly, you�d need a midi processor functionality anyway to do 
independent pitch bends or pitch bend offsets for each voice on separate 
channels.

The PMM  is a unbelievable monster and I can�t understand why it�s a 
discontinued product meanwhile

Jeremy Smith schrieb:
>
>
> Excellent!
>
> Also, you could detune those voices with the pitchbend control, and have
> different pitchbends each channel?
>
> Anyway, either solution sounds good.
>
> Thanks,
>
> Jeremy.
>
>