Xpantastic!

Hi Steve,

From what I understand, the Xpander will turn the voice off if it fails tuning.  
You can turn it back on in the master page if you need to.
Unfortunately I believe you have a hardware problem.  The good news is, it's 
probably an electrolytic capacitor in the voice 3 circuit. 
The usual suspect here is C549 a 2.2 uF 50 VDC electrolytic capacitor.
BTW
Given the vintage of these synths it's a good idea to recap the whole thing if 
possible.


Best Luck 

Karl Schmeer 



>From: steve_gruskin <steveg@...>
>To: xpantastic@yahoogroups.com
>Sent: Sun, March 4, 2012 7:38:19 PM
>Subject: [xpantastic] Xpander is skipping a voice

  
>I've had my Xpander since 1985 and for the first time had a Voice Processor 
>Error message. I re-set (start w/ Clear button) and now it sounds fine, but is 
>skipping voice 3. Any thoughts? Should I do another re-set or is there another 
>software cure for this? Thanks very much!