Kurzweil 1000PX power supply problem
2011-05-10 by hochtigal
Dear group members, I recently bought an 1000PX which doesn't turn on. It has an extra cable coming out from the back which, when I took a look inside, it is connected to the P1 slot and the original cables are disconnected and the transformer is missing. I made a few pictures but I can't attach them here so here's the link: http://www.flickr.com/photos/13976271@N00/ I've found a photocopy of the power supply schematics on k1000.net http://k1000.net/schematics/8-21_Kurzweil%20module%20Power%20Supply(300dpi).jpg Do I understand it right based on this picture that I need a center tapped transformer with 2x3VAC and 3 CT and an other one with 2x14VAC and 14 CT? P1 -- 3VAC P2 -- 3 CT P3 -- 3VAC P4 -- 14VAC P5 -- 14 CT P6 -- 14VAC Thanks for reading this.