Vintage Synth Repair

Hi. First post here... great forum !

I would like to know if someone would have a spare in order to finalize my Linn's PSU rebuild.

The part I'm looking for is very hard to find. It's a Lambda voltage regulator, and its reference is:

LAS6330A / in a TO-3 steel package

If anyone has one, please let me know!

Thanks and best,
Vincent.

Hello,
  Instead of tracking down a 1980's electronic part for a power supply, consider just using an inexpensive surplus PC power supply.  For $5 I got a used Dell 250Watt supply that has no trouble putting out 3A at +5V along with several amps at +12V, -12V, and +3.3V.  I believe that you can add the voltages together (for example: Gnd -> +5V +++ Gnd > +3.3V ==> +8.3 volts) because each branch output of the power supply is isolated from the other branches.
  An old PC power supply is a cheap way to get a high current regulated power supply if you only need +5V, +12V, -12V.  Most newer supplies have high current regulated (>5Amps) of 3.3V along with -5V.  Usually they require a minimum load on the +5Volts of about 1/2 amp, but the surplus Dell supply that I bought doesn't need a minimum load.

--- On Wed, 3/24/10, cpt.zilog <cpt.zilog@...> wrote:

> From: cpt.zilog <cpt.zilog@yahoo.fr>
> Subject: [vintagesynthrepair] Linn Drum Power Supply rebuild
> To: vintagesynthrepair@yahoogroups.com
> Date: Wednesday, March 24, 2010, 8:01 AM
> Hi. First post here... great forum !
> 
> I would like to know if someone would have a spare in order
> to finalize my Linn's PSU rebuild.
> 
> The part I'm looking for is very hard to find. It's a
> Lambda voltage regulator, and its reference is:
> 
> LAS6330A / in a TO-3 steel package
> 
> If anyone has one, please let me know!
> 
> Thanks and best,
> Vincent.
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>     vintagesynthrepair-fullfeatured@yahoogroups.com
> 
> 
>

Thanks for the tip... but my psu has been almost entirely rebuild by my techie... so I will only look for the LSA6330A at the moment... this could be the next step nevertheless.... but not atm

--- In vintagesynthrepair@yahoogroups.com, "cpt.zilog" <cpt.zilog@...> wrote:
>
> Thanks for the tip... but my psu has been almost entirely rebuild by my techie... so I will only look for the LSA6330A at the moment... this could be the next step nevertheless.... but not atm
>
This company bought Lambda quite a few yrs back

http://www.semtech.com/power-management/switching-regulators/

Thanks for the link. will check if any would be of use.
Best,
Vincent.


--- In vintagesynthrepair@yahoogroups.com, "Scott" <painintheamp@...> wrote:

>
> 
> 
> --- In vintagesynthrepair@yahoogroups.com, "cpt.zilog" <cpt.zilog@> wrote:
> >
> > Thanks for the tip... but my psu has been almost entirely rebuild by my techie... so I will only look for the LSA6330A at the moment... this could be the next step nevertheless.... but not atm
> >
> This company bought Lambda quite a few yrs back
> 
> http://www.semtech.com/power-management/switching-regulators/
>