Yahoo Groups archive
Thread
2010-02-22 by n8398r
I am trying to open the case on this unit. I have taken out all the screws on the back and on the bottom of the case towards the back. There is some play in the upper section of the case but it will not release. What's the trick to getting this thing open? Thanks in advance, Dan Kelly
2010-02-22 by Brian
Usually there area couple of screws at the side front that need to be removed before the top will open. You may find a row across the front as well. Regards Brian G3OYU
From: vintagesynthrepair@yahoogroups.com [mailto:vintagesynthrepair@yahoogroups.com] On Behalf Of n8398r Sent: 22 February 2010 1:20 AM To: vintagesynthrepair@yahoogroups.com Subject: [vintagesynthrepair] Kurzweil SP88x I am trying to open the case on this unit. I have taken out all the screws on the back and on the bottom of the case towards the back. There is some play in the upper section of the case but it will not release. What's the trick to getting this thing open? Thanks in advance, Dan Kelly
2010-02-28 by n8398r
Thanks for the help. I was able to get it open and find the source of the mechanical noise in a couple of the keys. Dan --- In vintagesynthrepair@yahoogroups.com, "Brian" <brian@...> wrote:
> > Usually there area couple of screws at the side front that need to be > removed before the top will open. You may find a row across the front as > well. > > > > Regards > > Brian G3OYU > > >