Yahoo Groups archive

Vintage Synth Repair

Index last updated: 2026-04-28 23:41 UTC

Thread

looking for an Arp Oddy/Axxe CTS slide pot

looking for an Arp Oddy/Axxe CTS slide pot

2009-08-03 by John Wieczorek

I'm in the midst of rebuilding an Arp 1601 sequencer.
Right now I'm refurbing the sliders - (complete removal, disassembly &  
cleaning).

I 'm short one 100K lin. - Does any one have one lying around?

John  - Somerset, NJ

Re: looking for an Arp Oddy/Axxe CTS slide pot

2009-08-03 by Scott

--- In vintagesynthrepair@yahoogroups.com, John Wieczorek <evening@...> wrote:
>
> 
> I'm in the midst of rebuilding an Arp 1601 sequencer.
> Right now I'm refurbing the sliders - (complete removal, disassembly &  
> cleaning).
> 
> I 'm short one 100K lin. - Does any one have one lying around?
> 
> John  - Somerset, NJ
>
What's the mm of travel for that one?

I'll see what I have here

Scott in Vermont

Re: [vintagesynthrepair] Re: looking for an Arp Oddy/Axxe CTS slide pot

2009-08-03 by evening@soundgate.org

Scott - I'll have to measure the throw when I get home.
it's CTS pn: 5700703 .

There are modern replacements and even some NOS out there, but the  
prices are a pretty high. I'm hoping someone has a salvaged piece  
hanging around.

I can clean and lube it, so it can even be full of cat hair and  
ashes(like the ones that I removed from my sequencer).

jmw


Quoting Scott <painintheamp@...>:
Show quoted textHide quoted text
> --- In vintagesynthrepair@yahoogroups.com, John Wieczorek
>>
> What's the mm of travel for that one?
>
> I'll see what I have here
>
> Scott in Vermont
>
>

Re: [vintagesynthrepair] looking for an Arp Oddy/Axxe CTS slide pot

2009-08-03 by Russ Rose

if it is same as sliders in Omni or Odyssey, 100K linear
with 137 5700703 part no?
will be glad to share one
it is used but good
Show quoted textHide quoted text
On Aug 3, 2009, at 7:57 AM, John Wieczorek wrote:

>
> I'm in the midst of rebuilding an Arp 1601 sequencer.
> Right now I'm refurbing the sliders - (complete removal, disassembly &
> cleaning).
>
> I 'm short one 100K lin. - Does any one have one lying around?
>
> John  - Somerset, NJ
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

Re: [vintagesynthrepair] looking for an Arp Oddy/Axxe CTS slide pot

2009-08-04 by Malte Rogacki

At 7:57 Uhr -0400 03.08.2009, John Wieczorek wrote:

> I'm in the midst of rebuilding an Arp 1601 sequencer.
> Right now I'm refurbing the sliders - (complete removal, disassembly &
> cleaning).
>
> I 'm short one 100K lin. - Does any one have one lying around?


http://www.synthfool.com/store/sliderpop.html


-- 
Malte Rogacki gacki@...
----------------------------------------------------------------------------
"Don't forget to TURN ON THE SYNTHESIZER. Often this is the reason why you
 get no sound out of it." (ARP 2600 Owner's Manual)
----------------------------------------------------------------------------

Re: looking for an Arp Oddy/Axxe CTS slide pot

2009-08-04 by Scott

--- In vintagesynthrepair@yahoogroups.com, evening@... wrote:
>
> 
> Scott - I'll have to measure the throw when I get home.
> it's CTS pn: 5700703 .
> 
> There are modern replacements and even some NOS out there, but the  
> prices are a pretty high. I'm hoping someone has a salvaged piece  
> hanging around.
> 
> I can clean and lube it, so it can even be full of cat hair and  
> ashes(like the ones that I removed from my sequencer).
> 
> jmw
> 
> 
> Quoting Scott <painintheamp@...>:
> 
> > --- In vintagesynthrepair@yahoogroups.com, John Wieczorek
> >>
> > What's the mm of travel for that one?
> >
> > I'll see what I have here
> >
> > Scott in Vermont
> >
> >
>
This place has quite a few new ones

www.futurlec.com

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.