From: christopher_s_rider <oldcrow@...>
To: <vintagesynthrepair@yahoogroups.com>
Sent: Tuesday, February 19, 2002 8:32 PM
Subject: [vintagesynthrepair] Re: Yamaha CS-60 voice board,
> Hm, never knew this group existed til now. In any case:
>
> The CS-50/60/80 'M' (master) voice boards are nearly identical
> among the 3 instruments. If you look at:
>
> http://www.cs80.com/docs/schem/cs80_circ5.jpg
>
> You can see the two FET switches that gate the saw and pulse
> waveforms to the filters. My bet is the saw switch-FET died, or its
> control transistor died.
>
> Crow
> http://www.cs80.com/
> /**/
>
> --- In vintagesynthrepair@y..., "Fin" <fin@w...> wrote:
>
> > I have one faulty voice card in a CS-60.
> > The sawtooth waveform is not present at the output, the pulse wave
> >is. I know that the Yamaha chip producing both the waveforms is fine.
> >
> > Does anybody have a scan for the schematics of the CS-60 voice
> >cards?
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, send an email to:
> vintagesynthrepair-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>