Hello:I had the same thing happen to me,I just vacuumed out the case the
best I could and took a rag and rubbed the rest of the loose sticky stuff
off the best I could,I also used a putty knife in some spots,then I went to
a craft store and bought some foam rubber in big pieces about the same
thickness as the original foam and cut it to fit the keyboard and glued it
in over the sticky residue that was still in the case,its a messy job thats
best done outdoors,but it worked out ok.
Regards,
Tim K.
direct link to my Ebay store.
http://www.sonicelectronicmusic.com
Show quoted textHide quoted text
>From: "atienne55" <atienne55@...>
>Reply-To: vintagesynthrepair@yahoogroups.com
>To: vintagesynthrepair@yahoogroups.com
>Subject: [vintagesynthrepair] Collapsed Foam
>Date: Sun, 30 Jul 2006 19:58:21 -0000
>
>Greetings to all, my first post. I have a Roland Jupiter-6 that has
>been stored in an Anvil case undisturbed for at least the last 8
>years. There is an oscillator tracking problem with it and repairs
>have been on the back burner. Finally settled down enough to fix and
>today I opened the case only to discover that the case foam has
>completely collapsed. I carefully removed the unit from the case and
>vacuumed as much of the crumbled foam as possible. Does anyone know
>what the best process to clean the unit (outside first and then
>inside). Would like to redeem myself and save if from the spare-parts
>graveyard. Thanks!
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>