Yahoo Groups archive

Vintage Synth Repair

Index last updated: 2026-04-28 23:41 UTC

Message

RE: [vintagesynthrepair] Finding a dry joint...!?

2011-11-01 by José Pereira

Hello.

Try to use a magnifying glass and a strong light to check the circuit board and the soldering joints of the components.

Using a multimeter, check if the power supply is distributed thru the board.

You can find the schematics on the following link:

http://soundprogramming.net/synthesizers/yamaha/yamaha_dx100

Good luck!

Best regards.

Jose

Portugal

De: vintagesynthrepair@yahoogroups.com [mailto:vintagesynthrepair@yahoogroups.com] Em nome de Quazimodo
Enviada: segunda-feira, 31 de Outubro de 2011 23:47
Para: vintagesynthrepair@yahoogroups.com
Assunto: [vintagesynthrepair] Finding a dry joint...!?

Hi guys,

Trying to fix a dead DX100 here. I have isolated the problem to a dry joint or open circuit somewhere. If I slightly twist or bend the main circuit board it all springs into life! This could take a while...;c)

Any techs here have any tips that could increase my chances of pinning down the problem...?

Cheers,
TOM

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.