Vintage Synth Repair

Hi folks,

I managed to fix it with a little trial and error.
If you feed the reset patch cord vis a .01 ceramic disc capacitor the problem is resolved.

Cheers,
TOM



--- In vintagesynthrepair@yahoogroups.com, "Quazimodo" <noddyspuncture@...> wrote:
>
> Thanks for the quick reply Mike. But no, the ground lug on the reset sockets isn't actually wired! And when I touch the 'live' tip to a known ground point it still doesnt reset!
> Strange eh?
> Any other ideas would be much appreciated...;c)
> 
>  
> 
> --- In vintagesynthrepair@yahoogroups.com, Mike <mrjdevries@> wrote:
> >
> > Korg uses s-trig on most vintage stuff.
> > When you pull the jack out, the tip probably makes contact with ground, resetting the sequencer.
> > You could verify this by touching the tip of the cable against the chasis, like a jack socket locknut. Does that reset the sequence?
> > 
> > (I don't own a sq10, so the above is speculation)
> > 
> > If the above holds true, then there may be a workaround, but I think it may involve a rotary switch and a DIY box with a bunch of cables.
> > 
> > Cheers
> > Mike
> > 
> > Sent from my Apple ][e
> > 
> > On 16/09/2011, at 10:36 PM, "Quazimodo" <noddyspuncture@> wrote:
> > 
> > > Hi everyone,
> > > 
> > > I have a Korg SQ-10 sequencer. I am trying to sequence different patterns of different lenghts by patching the reset whilst the sequence is running. So say for example I want to have an eight note sequence and then pull the cord and put it into the seventh channel to make the next run a seven note sequence, I am finding that as I pull the cord and change sockets - the sequence is interrupted and starts from the beginning...! Not the desired effect. Does anyone know why this is happenng and if there is a work around fix for it..?
> > > 
> > > Cheers,
> > > TOM
> > > 
> > >
> >
>