Forat sells part of the switches, but from memory, only the switch base. Not the cap. These are getting hard to track down. Also used in sequential Tom, sequential drumtraks , emu sp12 , emu sp1200 ,emu drumulator and linndrum. (and LM1 but I can't verify if they are the same) Sent from my Apple ][e On 11/06/2011, at 6:23 AM, Malte Rogacki <gacki@...> wrote: > Hello everyone; > > I recently got an Oberheim DX that was obviously partly cannibalized. > Surprisingly, most of the functions still work. However it lacks a few of > the drum switches (including the caps). > So I'm looking for a source for about 10 switches. I believe those are the > same as in the DMX. It would probably be possible to retrofit different > switches but naturally I would like to keep it as close as possible to the > original state. > > Any ideas? > > Thanks, > > Malte > >
Message
Re: [vintagesynthrepair] Oberheim DX/DMX switches
2011-06-10 by Mike
Attachments
- No local attachments were found for this message.