Originally these were manufactured by Marquard and the company still exists.
6425.1101 is compatible w/ Xpander p.ex. (I exchanged one in my Xpander) ...
http://www.marquardt-schalter.de/detail.html?&no_cache=1&L=1&tx_productkatalog_pi1[mode]=detail&tx_productkatalog_pi1[modifier]=0&tx_productkatalog_pi1[value]=1050&tx_productkatalog_pi1[pointer]=0&cHash=4a645b2eb9724691872815d53689b07a&prodID=2504
Open the DX, measure the dimensions of the switch and the pin layout,- then download the Marquardt catalogue.
They have a lot of switches and caps in different sizes, colors, w/ numbers, arrows and so on.
Site is in german and english.
good luck
:-)
Am 10.06.2011 22:23, schrieb Malte Rogacki:
Hello everyone;
I recently got an Oberheim DX that was obviously partly cannibalized.
Surprisingly, most of the functions still work. However it lacks a few of
the drum switches (including the caps).
So I'm looking for a source for about 10 switches. I believe those are the
same as in the DMX. It would probably be possible to retrofit different
switches but naturally I would like to keep it as close as possible to the
original state.
Any ideas?
Thanks,
Malte