Yahoo Groups archive

Vintage Synth Repair

Index last updated: 2026-04-28 23:41 UTC

Message

Re: Moog 901B oscillator

2011-02-19 by Scott

--- In vintagesynthrepair@yahoogroups.com, "André Hartung" <a.hartung@...> wrote:
>
> You mean 11.98 volts.
> 
> Sent from my Nokia mobile
> -----Ursprüngl. Nachr.-----
> Von: Scott
> Gesendet:  18.02.2011 13:41:39
> Betreff:  [vintagesynthrepair] Re: Moog 901B oscillator
> 
> 
> --- In vintagesynthrepair@yahoogroups.com, "Quazimodo" <noddyspuncture@> wrote:
> >
> > Of course -stupid me... now I see it. Thanks for all the replies guys.
> > 
> > A couple of other things confusing me on this schematic - where it says "selected for 2.45v at TPA..." - are those refering to Q8 and Q9...? And would TPA be the "A" on the base of Q7. Also Q7 says "selected" but with no explanation!
> > 
> > Finally, what diode could be used for D2 CL-1 ... could that be a IN34 ... ?
> > 
> > Cheers,
> > TOM
> > 
> > 
> > 
> > --- In vintagesynthrepair@yahoogroups.com, no freq <no.freq@> wrote:
> > >
> > > Look, +11,5V is made out of  the +12V and comes from the node formed with
> > > R1, P2 and C1, directly on the board. You'll find it in the upper left part
> > > of the schematic.
> > > 
> > > Le 17 févr. 2011 21:57, "Quazimodo" <noddyspuncture@> a écrit :
> > > 
> > > 
> > > 
> > > Hi guys,
> > > 
> > > I have a question about the Moog 901B Osc.
> > > 
> > > Looking at the schematic here:
> > > 
> > > http://www.freeinfosociety.com/media/images/4142.jpg
> > > 
> > > I see the +12v, -10v and -6v points noted - but I am also seeing three
> > > points marked +11.5v
> > > 
> > > Where was this +11.5 derived from originally?
> > > 
> > > If you look at the connector strip pin-out on the bottom right - there is no
> > > +11.5v coming in..!
> > > 
> > > Cheers,
> > > TOM
> > >
> >From electronic theory , there's 1.2 mA flowing thru R1 and P2
> That means there's 10.98 volts at the junction of R1 an P2.
> 
> Either the 11.5 is a nominal voltage or they have the wrong value for R1 to get 11.5 volts there. I think it's only used to partially isolate the "11.5" from the reg +12 volts
> 
> 
> 
Yeah...11.98 volts...I have coffee now

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.