Vintage Synth Repair

Thanks awesome advice. Thanks for the link too! -pc

On Mar 5, 2010, at 4:09 AM, Arto Koivisto wrote:

> Bits of glass fiber circuit boards are good for scraping/rubbing away
> most obvious bits of dirt. There's some kind of a resin in these  
> boards
> that gently rubs of the corrosion as well. Once the surface is  
> somewhat
> clean, tthe remaining dirt can be burned away with the help of the  
> flux
> in the solder. Then, excess solder residues can be cleaned with solder
> wick and flux residues with isopropanol (f.ex. if your solder isn't of
> no-clean type).