Vintage Synth Repair

I had to replace a tantalum on my Roland RS202 to fix a bad note. Do tantalums have the same limited life that electrolytics have?
Ta
Susie
http://www.myspace.com/susangardener

--- In vintagesynthrepair@yahoogroups.com, "ambrosia800" wrote:
>;
> Re: Crumar Trilogy repair
>
> It is not a normal ground loop problem. The hum seems to be directly related to
> the number of voice cards in the machine. So I think, the power supply could be
> the problem.
>
> I think, a recapping of the power supply should be the way to go.
>
> On the other hand, there is a tantalum on every voice card. I think, changing
> the tantalums on the voice cards shouldn´t be a bad choice either.
>
> Anybody of you got some spare CEM´s?
> One 3330 and a 3320 as well are broken. For one of my other machines I´m also looking for a CEM3340.
>
>
>
> --- In vintagesynthrepair@yahoogroups.com, "Scott" wrote:
> >
> >
> >
> > -If you can take the "ground loop" out of the equation, the most likely cause is power supply filtering capacitors that have gone dry and arent doing what theyre supposed to.
>; >
> > I see this as a regular thing here in my shop.
> >
> > Caps are easy to get and fairly cheap and replacing them drops troubleshooting time way down
> >
> > Just doing that may make your troubles flee
> >
> > Scott in Burrrrrrrr-mont
> >
>