Hi, The trimmers are fine. When I'm comparing the voltages beetwen VCO1 and VCO2, the pitch of VCO1 is shifting if I touch the grid of its JFET (Q6) with my voltmeter probe while there is no effect on VCO2 if I touch the grid of its JFET (Q13). Nicolas --- In vintagesynthrepair@yahoogroups.com, "Monie" <arp2600fan@...> wrote: > > Caveat: I am not a tech. > But I can't help but ask--did you replace the trimmers as well? >
Message
Re: ARP Odyssey 2800 oscillator problem.
2009-11-11 by Nicolas