http://www.route66studios.com/batteries.html
synthparts schrieb:
No, these synths use a 3V Lithium battery so replace it with a commonly available lithium coin cell of the same size not a NiMH or NiCD.
Doug
synthparts.com
--- In vintagesynthrepair@yahoogroups.com, "Brian Davies" wrote:
>
> Hi jmn
>
> Whenever we need to replace a battery we find out the type number from the
> old one and then find an equivalent in the NiMH listings, don't use NiCd.
> After fitting the unit should be powered for at least 14 hours to fully
> charge the new unit.
>
> Regards
> Brian G3OYU
> www.g3oyu.co.uk
>
> _____
>
> From: vintagesynthrepair@yahoogroups.com
> [mailto:vintagesynthrepair@yahoogroups.com] On Behalf Of master_peau
> Sent: Thursday, 10 September 2009 22:05
> To: vintagesynthrepair@yahoogroups.com
> Subject: [vintagesynthrepair] Ensoniq SQ1plus
>
>
> My board shows " low battery". I would appreciate knowing what battery to
> use to replace. Thanks. jmn
>.