Like to introduce myself... I've been a producer and Live Pa artist for 10 yrs in Toronto into techno... I'm an avid DIY'r and have modded/built the following gear... Moog MG1 - convert to midi (synjack) DR-110 - breakout box to cahnge voice parameters (tuning decay snap) SIDbox V2 - built a stereo SID from the uCapps site using the 6581 sid chip... Presently building a mono version Gear List Ableton Live SH-101 TR-707 DR-110 Tama Techstar-TS305 Juno-60 JX-3P with PG200 Nord Micro Modular Yamaha A4000 BCR2000 Moog MG1 SIDbox Mackie 1202 RNC compressor M-audio FW410 Purchased a red 101 for $100 about a year ago and have resurrected it from the near dead... It was coverd in grime, has a dead F# key, transpose toggle snapped off, missing battery cover, and broken pitch bender handle... Fixed all of those but still can't get the dead key working will try again later... Followed the tuning calibration document and still have tuning issues and have discovered it is the power switch... When wiggling the power switch it will change tune... I removed the switch and soaked it in electrical cleaner and resoldered it to find no change... So does anyone know which of the 8 traces on the switch PCB can be bridged to bypass the switch? As for my intro I do not mean to come off as a braggart and just want to give some background about myself... Thanks... bri.
Message
New Memeber SH-101 (How to Hardwire Power Switch?)
2008-12-03 by cosmosuave