Vintage Synth Repair

Is the LFO LED blinking?
The sequencer and the Arpeggiator run on the LFO clock.

Also do as the other reply and remove the battery from the circuit 
and measure the voltage.
GD


--- In vintagesynthrepair@yahoogroups.com, "Ambrosia" <s_carter@...> 
wrote:
>
> Hi! 
> 
> I have a Moog Source with problems to the Arpeggiator and 
Sequencer:
> 
> If you select the Sequencer, the display shows the 88 digits for a 
very 
> short time, then goes black again. You can not record anything 
into the 
> Sequencer and play it back. Both sequences are empty at the moment.
> 
> Also for the Arpeggiator. Here you can play in a sequence, the 
digits 
> count down in the display, until you hit the first note played 
again. 
> But then you can not play it back, there is no sound. 
> 
> Everything else with the level 2 functions (S&H etc.) is working.
> The battery is good (3,4 V) and the membrane switches are working 
> pretty well! The unit is in a good overall condition. No other 
problems.
> 
> Any ideas?
>