At 6:05 Uhr -0700 09.05.2008, scott frye wrote: > If the switches in question are capacitive touch you may want to replace the > IC / transistor that gets that signal. I dont have a schematic so I'm only > guessing. The switches are momentary switches that drive a 4013. I guess this could be the likely culprit here. -- Malte Rogacki gacki@... ---------------------------------------------------------------------------- "Don't forget to TURN ON THE SYNTHESIZER. Often this is the reason why you get no sound out of it." (ARP 2600 Owner's Manual) ----------------------------------------------------------------------------
Message
[vintagesynthrepair] Re: arp omni
2008-05-09 by Malte Rogacki