Yahoo Groups archive

Vintage Synth Repair

Index last updated: 2026-04-28 23:41 UTC

Message

Re: T400 Organ

2007-10-08 by Roy Davies

Hi Glynn I checked the swell pedal bulb all ok and there are no 
speaker wire dislodged or any other wires that I can see are not 
connected. It still will not speak to me. is there any fuses that may 
have blown or the problem is with the amplifier? Im sorry I cleaned 
it now realy angry with myself as it was fully working when it was 
given to me.
Regards Roy(UK) 










Glyn-- In vintagesynthrepair@yahoogroups.com, glynn buckley 
<thowdnudger@...> wrote:
>
> Hi Roy......Im not sure about this ....... I have a T500 .....Is it 
possible that the bulbs gone in the swell pedal....or by any chance 
have you knocked any of the speaker wires off?...Little tip....check 
the oil in the generator, you may not be able to buy 
anywhere...unless there`s some on the net.....Ive always used Singer 
sewing machine oil,the girls will probably be able to tell you where 
to get it, ....welcome to the wonderful world of Hammond 
organs ...Regards Glynn
> 
> 
> To: vintagesynthrepair@...: roy.davies7@...: Sun, 7 Oct 2007 
09:13:03 +0100Subject: [vintagesynthrepair] T400 Organ
> 
> 
> 
> 
> Hi new to the group hope someone can help me. I have been given a 
T400 whichwas fully working when picked up I have cleaned all the 
dust and cobwebsfrom the inside and polished up the keys and cabinet 
before placing in thehouse. For some reason i carnt get a sound out 
of it now. I switch it on itlights up generator turns leslie motor 
runs fast and slow the rythme boxlight flashes to the beat but not a 
sound from anything swell pedel moves okany idea`s? ( did move out 
the pedels to fix a spring that had come loose) Regards Roy(UK) 
> 
> 
> 
> 
> 
> 
> _________________________________________________________________
> Feel like a local wherever you go.
> http://www.backofmyhand.com
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.